Welcome to Shenzhen Bogao Marking Technology Co. Ltd.
Service Hotline:
138-0885-1890

After sales service

Contact Us

You are here:Home >> After sales service... >> FAQ

FAQ

Round bottle labeling machine maintenance and maintenance

Time:2020-07-11 Views:3548 Publish:
圆瓶贴标机保养与维护
      Before turning on:
      1. Before starting the machine, you must first check whether there is debris on the conveyor belt of the labeling machine.
      2. Check whether the power supply and air supply are normal.
      3. Drain the water inside the air compressor.
      4. Check the parts of the machine that are easy to loose, and if it is loose, it should be fastened in time.
      5. Check whether the device sensor is normal.
      After shutdown:
      1. Check the turntable and conveyor belt wear.
      2. Clean the machine and wipe the outer surface of the machine with a dry cloth.
      3. If there is adhesive on the conveyor belt, it can be wiped with a damp cloth.
      4. Check whether each belt slips.
      Regular maintenance:
      1. Clean the sensor regularly.
      2. Carry out regular maintenance on the conveyor belt and transmission gear, clean the oil stains, and apply new butter.
      3. To ensure a qualified indoor working environment, the labeling machine should be placed in a ventilated and dry environment.
      4. After the labeling machine has been operating for a long time, be sure to turn on the cooling fan and turn off the machine after the temperature drops to avoid the damage caused by the high temperature to the labeling machine.
      5. The labeling machine that has not been used for a long time should be unplugged and covered with a dustproof cloth to prevent dust from falling on the labeling
Copyright © 2019 Shenzhen Bogao Marking Technology Co. Ltd. All Rights Reserved.   
Web Design—Tiandixin
pc加拿大官方网站-加拿大28预测大白-加拿大28在线预测网站大白-加拿大28预测大神预测-加拿大28组合精准算法